Installation instructions for drip tape

     The installation of drip irrigation tape has always been the content that users need to master. The quality of its installation will directly affect its later use effect. Therefore, we should install the equipment in a certain way. We also need to follow certain requirements when installing, which is described in detail below.
1. In order to ensure balanced pressure, uniform dripping, and save consumables and electricity bills, the water source and the location of the hub are generally selected in the middle of the plot, and the location is higher.
2. All levels of pipelines in the drip irrigation belt should be arranged vertically with the upper pipeline. Under flat slope terrain, the equipment should be perpendicular to the upper pipeline, and its laying should also be laid symmetrically on both sides of the (sub) branch pipe; in a uniform slope terrain Under the conditions, the capillary is arranged symmetrically on both sides of the branch (auxiliary) pipe. According to the hydraulic properties of the capillary, it is short in the reverse slope direction and long in the down slope direction.
3. Try to install the branch pipes on both sides of the main pipe, and the length of the branch pipes should be the same as possible, so that they are arranged symmetrically.
4. When conditions permit. The branch pipes should be arranged in the same direction as the roads and ditches as far as possible to facilitate transportation, installation and maintenance.
5. The laying direction of the final drip irrigation belt should be parallel to the planting direction of the crops.
6. Try to install the branch pipes on both sides of the main pipe, and the length of the branch pipes should be the same as possible, so that they are arranged symmetrically.
In order to ensure that the drip irrigation tape can achieve the ideal use effect in farmland irrigation and achieve the purpose of saving water, we should install the drip irrigation tape according to the correct steps, and the above-mentioned requirements must be followed during the installation process.